{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Stub stepped drill HSS 90° M10 GARANT
Article no.: 117120 M10
Article code:
- Tool material: HSS
- Standard: DIN 1897
- Tolerance nominal ⌀: h8
- Point angle: 118
- Shank: Parallel shank to h8
Product details
Technical Data
| for screws | M10 | |
| Coating | vaporised | |
| Tool material | HSS | |
| Standard | DIN 1897 | |
| Tolerance nominal ⌀ | h8 | |
| Point angle | 118 degrees | |
| Shank | Parallel shank to h8 | |
| Countersink angle | 90 degrees | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| ⌀ D1 1st step with chamfer h8 | 10,5 mm | |
| ⌀ D2 2nd step with chamfer h8 | 19 mm | |
| Step height L1 1st step | 23 mm | |
| Flute length Lc | 64 mm | |
| Overall length L | 127 mm | |
| Shank ⌀ Ds | 19 mm | |
| Feed f in steel < 750 N/mm2 | 0,1 mm/rev. | |
| Shank tolerance | h8 | |
| Colour ring | without | |
| Type of product | Stepped drill |
Identification numbers & Classifications
| Article number | 117120 M10 | |
| EAN / GTIN | 4045197035943 | |
| Manufacturer number | 117120 M10 |
Application Table
N
45
P
40
P
30
P
25
K
25
N
80
Description
Version:
Very sturdy. Tight concentricity tolerances between drill ⌀ and counterbore ⌀ guarantee exact alignment.
Special surface treatment, resulting in reduced tendency to edge build-up and improved chip evacuation.
Special surface treatment, resulting in reduced tendency to edge build-up and improved chip evacuation.
Application:
Particularly suitable for NC machines due to high positional accuracy, excellent centring properties and great sturdiness. The preceding centring operation can thus often be omitted.
For through holes for screws to DIN-ISO 273 and countersinks to DIN 74, sheet 1 form A, fine version.
For screws to ISO 2009, 2010, 7046, 7047 (DIN 963, 964, 965 and 966).
For through holes for screws to DIN-ISO 273 and countersinks to DIN 74, sheet 1 form A, fine version.
For screws to ISO 2009, 2010, 7046, 7047 (DIN 963, 964, 965 and 966).