{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Jobber drill, long HSS N 9,8 mm GARANT
Article no.: 116000 9,8
Article code:
- Tool material: HSS
- Standard: DIN 340
- Type: N
- Tolerance nominal ⌀: h8
- Point angle: 118
Product details
Technical Data
| Nominal ⌀ DC | 9,8 mm | |
| Coating | uncoated | |
| Tool material | HSS | |
| Standard | DIN 340 | |
| Type | N | |
| Tolerance nominal ⌀ | h8 | |
| Point angle | 118 degrees | |
| Shank | Plain shank | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| recommended maximum drilling depth L2 | 106,3 mm | |
| Flute length Lc | 121 mm | |
| Overall length L | 184 mm | |
| Shank ⌀ Ds | 9,8 mm | |
| Feed f in steel < 750 N/mm2 | 0,07 mm/rev. | |
| Colour ring | without | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 116000 9,8 | |
| EAN / GTIN | 4045197025630 | |
| Manufacturer number | 116000 9,8 |
Application Table
N
64
N
52
N
40
P
40
P
30
P
25
K
25
Description
Version:
Vaporised from 2.4 mm. Particularly for deep hole drilling (for deep holes, repeated chip evacuation is necessary).
With point geometry shape A from size 4 mm.
With point geometry shape A from size 4 mm.
Advantage:
Especially suitable for long reach purposes. (When used to drill deep holes, low feed rates and frequent drill pecks are necessary).
Recommendation:
Maximum drilling depth:
L2 = LC - 1.5 × DC.
L2 = LC - 1.5 × DC.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Jobber drill, long HSS N 9,8 mm GARANT
on request
Subsequent delivery
0 pieces in stock
22,70 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
7 pieces in stock
39,75 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
80 pieces in stock
14,56 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 2 | 2 | 2 |
| Coating | uncoated | uncoated | uncoated |
| Colour ring | without | red | without |
| Overall length L | 184 mm | 184 mm | 184 mm |
| Shank | Plain shank | Plain shank | Plain shank |
| Point angle | 118 degrees | 118 degrees | 118 degrees |
| recommended maximum drilling depth L2 | 106,3 mm | 106,3 mm | 106,3 mm |