{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Wet film separating agent NSR Multi 500 ml
Article no.: 083087 500
Article code:
- Labelling of hazardous substances: GHS02: Flame; GHS07 caution; GHS09 harmful to the environment
Product details
Technical Data
| Spray head | Standard | |
| Contents | 500 ml | |
| Colour | yellow-brown | |
| Solubility in water | insoluble | |
| Labelling of hazardous substances | GHS02: Flame; GHS07 caution; GHS09 harmful to the environment | |
| Version | Spray can | |
| Type of product | Parting agent |
Identification numbers & Classifications
| Article number | 083087 500 | |
| EAN / GTIN | 5412386069161 | |
| Manufacturer number | 33234-AA |
Description
Version:
General-purpose wet film separating agent. Separating film for thermoset resins and thermoplastics, resistant to high temperatures.
- Wet film separating agent with high separation performance.
- Silicone-free, minimises material carry-over on to moulded parts. Ideal for moulded parts with a further processing stage (painting, printing or adhesively bonded).
- Operating temperature range up to 200°C.
- Does not accumulate in the mould.
Application:
In plastic injection moulding, to assist the release from the mould of thermoset resins and thermoplastics. Also outstandingly suited to assisting the release of moulded parts with complex geometries.
- Apply a thin even film to the clean dry mould.
- Wait a short time until the solvent has evaporated.
- For sustained separation effect, repeat the process.
- Refer to the current safety data sheet (SDB) for safety instructions.