{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
U-shaped high-performance clamp, heavy duty STBU 500/175
Article no.: STBU40-17-15
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Technical Data
| Type of product | Clamp |
Identification numbers & Classifications
| Article number | STBU40-17-15 | |
| EAN / GTIN | 4008158027098 | |
| Manufacturer number | STBU40-17-15 |
Description
Description:
- Clamping force up to 22,000 N at tightening torque of 80 Nm
- Double-sided step-over clamping, specially suited for T-profiles and double T-profiles
- With 19 mm hexagonal bolt on the end of the spindle
- Long life due to heat-resistant pressure plate with sintered steel insert, which can be tilted up to 35°
Feature:
- Overhead: 175 mm
- Material / surface:
- Fixed and sliding bracket made of tempered steel, galvanized
- Spindle with trapezoidal thread made of steel rolled and tempered, phosphated
- Steel toggle, galvanized
- Pressure plate made of steel, phosphated
- Rail: 40x20 mm
- Clamping depth fixed bracket: 150 mm
- Clamping depth of slide bracket: 110 mm
- Wingspan: 500 mm
Advantage:
Extremely sturdy
- The U-shaped fixed arm is produced and tempered from a single piece, thus very torsion-resistant. This guarantees you maximum tensile strength and sturdiness.
- The heat-resistant pressure plate (SGU/STBU) is replaceable and can be tilted up to 35° so it can even clamp on angled or sloping surfaces. It has an extremely long service-life due to the oil-soaked sintered steel insert's excellent sliding and emergency running properties.
- The sliding arm is made from forged tempered steel, and can withstand extremely large loads. You can be sure of that.
- The tempered spindle is particularly sturdy and wear-resistant. This considerably increases its durability.
- The sturdy tommy bar has special rounded hand-friendly ends, as well as a hexagonal bolt. This allows powerful, controlled clamping.
Application:
- Metal construction
- Locksmith work
- Car body construction
- Step-over clamping
Note:
- Danger warnings:
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Care instructions:
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean and oil the spindle regularly
- If the rail is shiny, roughen both narrow sides with emery cloth (100 grain)
- Clean and oil the pressure plate regularly