{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Technical Data
| Type of product | Clamp |
Identification numbers & Classifications
| Article number | BH-MFT | |
| EAN / GTIN | 4008158041902 | |
| Manufacturer number | BH-MFT | |
| L-Number | L80030 443 |
Description
Description:
- Accessory for BESSEY horizontal pull-down clamps WNS-SET-MFT For using on multifunction tables such as Festool MFT and Sortimo WorkMo with hole diameter of 20 mm and plate thickness of min. 19 mm Can also be used as a universal limit stop for workpieces
Feature:
- Bolts: Ø20 mm
- Contents: 4 x bench hook / 4 x knurled nut
- Material / surface:
- Upper and lower part made of reinforced PA6 plastic
- Steel spindle, galvanized
Application:
- Interior fittings
- DIY
- Furniture and joinery works
- For use on multifunctional tables
Note:
- Danger warnings:
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Care instructions:
- Clean the rails with solvent
- Clean and oil the spindle regularly