{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
3M™ Fit Test Kit, Qualitative, Bitter, FT-30
Article no.: 7000002042
Copy
Article code:
Copy
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Identification & Classification
| Article number |
7000002042
Copy |
|
| EAN / GTIN |
00051138542030
Copy |
|
| Manufacturer number |
7000002042
Copy |
|
| L-Number |
L01110 123
Copy |
|
| Manufacturer/responsible person | 3M DEUTSCHLAND GmbH, Carl-Schurz-Straße 1, 41453 NEUSS, Germany, www.3mdeutschland.de |
Description
Description:
The products can be used to validate face-to-respirator seal on any disposable respirators or half mask respirators. To fit test a halfmask respirator, it must be fitted with a P3 particulate filter for the fit test. 3M™ offers two Qualitative Fit Test Apparatus Kits FT-10 (Sweet) and FT-30 (Bitter). FT-10 uses a test solution of sodium saccharin that produces a sweet tasting aerosol. FT-30 uses a test solution of denatonium benzoate to produce a bitter taste. The choice between the bitter and sweet test kit is a personal one. However, a small percentage of the population is unable to detect saccharin in which case the bitter test must be used (and visa versa if the bitter cannot be detected then the sweet must be used). 3M recommends users are face-fit tested before using a respirator and repeated regularly as part of their occupational respiratory protection program. Follow all applicable national and other guidance with respect to face fit testing. If not available, please see ISO 16975-3 or contact 3M.
Advantage:
- Qualitative fit test kit including hood, collar, 2 nebulisers, bitter tasting sensitivity solution, bitter tasting fit test solution and laminated user instructions.
- FT-30 uses a test solution of denatonium benzoate to produce a very bitter tasting spray
- Spare hoods, nebulisers and solutions are also available
- Spare hoods, nebulisers and solutions are available for the fit test kits.
- For Occupational Use Only
- 3M™ recommends users are face-fit tested before using a respirator and repeated regularly as part of their occupational respiratory protection program.
- Follow all applicable national and other guidance with respect to face fit testing.
- In the UK please see further guidance from the Health and Safety Executive (HSE) and their guidance document INDG 479 or contact 3M™
Recommendation:
- Draping for surgical procedures
- Separating edges of the incision from contact with visceral contents, instruments and gloves during the procedure