{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
LNMT 150608ANTN MM DT7150 Tangentially Clamped Inserts with a Negative Land and Reinforced Chipformer for Unfavorable Cutting Conditions
Article no.: 5605408
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Technical Data
| Series | TANGMILL | |
| Type of product | Indexable insert for milling |
Identification numbers & Classifications
| Article number | 5605408 | |
| EAN / GTIN | 7291075179392 | |
| Manufacturer number | 5605408 | |
| L-Number | L23970 235 |
Description
Description:
Milling Indexable Inserts, Depth of Cut Maximum (APMX) 7.5 mm, Insert Length (INSL) 15.3 mm, Insert Thickness (S) 12.9 mm, Insert Width (W1) 6 mm
Feature:
- Corner Radius (RE) 0.8 mm
- Depth of Cut Maximum (APMX) 7.5 mm
- Insert Included Angle (EPSR) 90 Degrees
- Insert Length (INSL) 15.3 mm
- Insert Thickness (S) 12.9 mm
- Insert Width (W1) 6 mm
- Maximum Feed per Tooth (fz(max)) 0.4 mm/tooth
- Minimum Feed per Tooth (fz(min)) 0.3 mm/tooth
- Number of Cutting Edges 4
- Wiper Edge Length (BS) 2 mm