Description:
The drive is equipped with a collet tool mounting for mounted tools. The exhaust air flow of the air grinder is at the back. The drive has a high rotational speed and has to be used with oil. 0.75 m exhaust hose and 2 m air supply hose with 1/4″ male threaded connection and threaded quick coupling (STGI), 3 mm collet, 2 keys. The slim and lightweight air grinder has a ring throttle version.
Feature:
- Operating pressure: 6.3 bar
- Power output: 100 Watt
- Rotational speed: 70000 RPM
- Collet group: 15
- Throttle type: Ring
- Width, metric: 21 mm
- Air consumption, at idle: 0.25 m³/min
- Air consumption, under load: 0.12 m³/min
- Incl. dia collet [mm]: 3 mm
- Length, metric: 145 mm
- Number of oil drops [min]: 1 Tropfen
- Net weight: 0.09 kg
- Air supply hose internal dia.: 4.8 mm
- Exhaust direction: rear
- Height: 21 mm
Advantage:
- The drive with a ring throttle can be used for continuous use.
- No dust turbulence on the workpiece side.
- Ideal for the recommended mounted tools thanks to the collet mounting.
- The high rotational speed affords the drive a high cutting speed for tungsten carbide burrs and grinding points.
- Easy guidance thanks to slim, lightweight design.
Note:
- The drive must be operated with the specified number of oil droplets in order to prevent premature malfunctioning.