{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Revolving lathe centre 60° 4
Article no.: 321255 4
Article code:
Product details
Technical Data
| Morse taper | MT4 | |
| Body ⌀ D | 60 mm | |
| Reach B | 106 mm | |
| largest centre point ⌀ 60° A | 28 mm | |
| maximum radial run-out | 0.003 mm | |
| Centre point length C | 35 mm | |
| maximum speed | 10,000 min-1 | |
| for workpiece weight | 1,200 kg | |
| Type of product | Centring drill |
Identification numbers & Classifications
| Article number | 321255 4 | |
| EAN / GTIN | 4045197774422 | |
| Manufacturer number | 321255 4 |
Description
Version:
Point angle 60°.
- With extended centre and draw-off nut, specially for CNC machines.
- Complete tool hardened and ground.
- Special roller bearings for high loads and speeds.
- Live centre through hardened, can be reground many times.
- Maintenance-free due to lifetime lubrication.
- Special seal prevents ingress of dirt and coolant.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
For high loads and speeds, specially for NC machines.
Note:
Draw-off nut for NC machines to remove tip from tailstock sleeve.