{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HiRunER precision ER collet chuck 32
Article no.: 308542 32
Article code:
Click to enlarge image
Click to enlarge image
Standard ER chuck -> Collets are not inserted 100 % into the chuck.
Click to enlarge image
HiRunER -> the full surface of the collet is seated in the chuck -> higher retention forces! -> reduced radial run-out!
Click to enlarge image
- Arbor standard: ISO 26623-1
- Balance quality G at rotational speed: G 2.5 at 25,000 rpm
- Concentricity: ≤ 3
- Machining strategy: HPC; HSC
- ER chuck key No. 309748; No. 309749: 32
Product details
Technical Data
| for ER collets | 32 | |
| Adapter | PSC 63 A = 100 | |
| Arbor standard | ISO 26623-1 | |
| Balance quality G at rotational speed | G 2.5 at 25,000 rpm | |
| Concentricity | ≤ 3 µm | |
| Machining strategy | HPC; HSC | |
| Clamping range | 2 mm - 20 mm | |
| Overhang dimension A | 100 mm | |
| External ⌀ D | 52 mm | |
| Spare ER clamping nut No. 309617 | 32 | |
| ER chuck key No. 309748; No. 309749 | 32 | |
| Type of product | Collet chuck |
Identification numbers & Classifications
| Article number | 308542 32 | |
| EAN / GTIN | 4045197944115 | |
| Manufacturer number | 308542 32 |
Description
Version:
External and internal tapers are ground. All shanks are turned for smooth running. Including RFID/Balluffchip bore, high-performance clamping nut up to 25000 rpm.
Advantage:
- Excellent concentricity in the system (chuck + collet + clamping nut), 3 µm radial run-out with a 2 µm clamping nut, 6 µm radial run-out with a 5 µm clamping nut.
- Extremely strong holding force (up to factor 2 better than the standard ER chuck).
- Vibration reduction effect due to 2-part clamping nuts.
Application:
For clamping tools with plain shank in collets to DIN 6499 − Form A and B.
Supplied with:
Supplied with precision clamping nut.
Optional extras:
Coolant tube No. 309885, assembling key No. 309893, ER collets No. 308901 − 309432, hook spanner No. 628400 or torque wrench No. 309749 or 628520.
Note:
- Clamps only nominal ⌀ up to shank ⌀ tolerance h 10.
- Do not use the clamping nut in combination with a sealing washer.
- Use the precision collet chuck always in conjunction with the precision clamping nut No. 309617.
- Use in combination with Fahrion collets.
- The blue design ring must be removed for Fahrion HP 2µm ER collets