{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Alternative article:
-
Article no.: 252015 CA125P
WNMG 080408 wiper, Grade: CA025P
Article no.: 252015 CA025P
Article code:
Product details
Technical Data
| ISO code indexable insert | WNMG 080408 | |
| Corner radius | 0.8 mm | |
| Grade | CA025P | |
| Tool material | Carbide | |
| Main application | P | |
| Cutting conditions | slightly interrupted | |
| Chip breaker | WP | |
| Cutting depth ap | 0.5 mm - 2 mm | |
| Feed f | 0.07 mm/rev. - 0.3 mm/rev. | |
| Cutting speed vc main application | 70 m/min - 420 m/min | |
| Coating | CVD | |
| Number of changes/inserts | 6 | |
| Finishing/roughing assignment | Finishing | |
| Type of product | Indexable insert for turning |
Identification numbers & Classifications
| Article number | 252015 CA025P | |
| EAN / GTIN | 4960664865697 | |
| Manufacturer number | TMH00329 |
Application Table
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
WNMG 080408 wiper, Grade: CA025P
on request
In stock
11 pieces in stock
9.07 £
£7.72
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
241 pieces in stock
from
1
Pieces
£9.36
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
£7.80
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
543 pieces in stock
from
1
Pieces
£10.38
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
£8.66
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of changes/inserts | 6 | 6 | 6 |
| Corner radius | 0.8 mm | 0.8 mm | 0.8 mm |
| ISO code indexable insert | WNMG 080408 | WNMG 080408 | WNMG 080408 |
| Tool material | Carbide | Carbide | Carbide |
| Cutting depth ap | 0.5 mm - 2 mm | 0.3 mm - 2 mm | 0.3 mm - 2 mm |
| Feed f | 0.07 mm/rev. - 0.3 mm/rev. | 0.1 mm/rev. - 0.4 mm/rev. | 0.15 mm/rev. - 0.35 mm/rev. |
| Type of product | Indexable insert for turning | Indexable insert for turning | Indexable insert for turning |