{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
KOMET KUB Quatron® indexable drill Combination shank, 2×D, ⌀ DC m7: 31mm
Article no.: 235500 31
Article code:
- Drill depth for indexable insert drill up to: 2×D
- Shank: DIN 6535 HE, DIN 6595
- Use for drilling: Centre drilling; limited cross-drilling; oblique spot drilling; Cross-drilling; Centre drilling; Aperture; oblique exit; convex
- Through-coolant: yes
Find similar products here:
Product details
Technical Data
| Series | KUB Quatron® | |
| Nominal ⌀ D | 31 | |
| Drill depth for indexable insert drill up to | 2×D | |
| Shank | DIN 6535 HE, DIN 6595 | |
| Use for drilling | Centre drilling; limited cross-drilling; oblique spot drilling; Cross-drilling; Centre drilling; Aperture; oblique exit; convex | |
| Through-coolant | yes | |
| Reach L1 | 62 mm | |
| for inch ⌀ | 1 7/32 in | |
| Overhang LA | 91 mm | |
| Shank ⌀ Ds | 32 mm | |
| Shank length Ls | 60 mm | |
| ISO code indexable insert | SOEX 090408 32-.. | |
| Pack of insert screws | 239652 15IP1 (2.8 Nm) | |
| Number of cutting edges Z | 1 | |
| Overall length L | 146 mm | |
| Type of product | Indexable drill |
Identification numbers & Classifications
| Article number | 235500 31 | |
| EAN / GTIN | 4047109047358 | |
| Manufacturer number | U10 23100 |
Description
Version:
With combination shank.
- Optimised coolant channels for reliable chip evacuation.
- Point angle 174° for almost flat-bottomed holes.
Application:
- For stationary and rotating use.
- For difficult drilling conditions (rolling scale, sloping surfaces of castings, interrupted cutting).
- For bores with tolerance ± 0.2 mm.
With indexable inserts No. 236520 − 236576.
Supplied with:
Clamp screws (without indexable inserts).
Note:
Further sizes available on request.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
KOMET KUB Quatron® indexable drill Combination shank, 2×D, ⌀ DC m7: 31mm |
on request
In stock
4 pieces in stock
£254.02
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
4 pieces in stock
£343.18
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
16 pieces in stock
256.24 £
£202.52
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 1 | 1 | 1 | 1 |
| Drill depth for indexable insert drill up to | 2×D | 2×D | 2×D | 2×D |
| ISO code indexable insert | SOEX 090408 32-.. | WOEX 05T304 | SOGX 100408 | SOMT110408 / XOMT110406 |
| Nominal ⌀ D | 31 | 31 | 31 | 31 |
| Shank length Ls | 60 mm | 60 mm | 68 mm | 60 mm |
| Pack of insert screws | 239652 15IP1 (2.8 Nm) | 239700 8IP (1.3 Nm) | 239700 10IP (2.8 Nm) | 232980 5 (TX15;3Nm) |
| Overhang LA | 91 mm | 91 mm | 86 mm | 92 mm |