{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Power Drill wisselplaat-volboor Combischacht 34,5 mm
Article no.: 234010 34,5
Article code:
- Drill depth for indexable insert drill up to: 4×D
- Shank: ISO 9766
- Use for drilling: limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling
- Through-coolant: yes
- Machining strategy: HPC
Product details
Technical Data
| Series | Power Drill | |
| Nominal ⌀ D | 34.5 | |
| Drill depth for indexable insert drill up to | 4×D | |
| Shank | ISO 9766 | |
| Use for drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Reach L1 | 140 mm | |
| Overhang LA | 166 mm | |
| Shank ⌀ Ds | 40 mm | |
| Shank length Ls | 68 mm | |
| Maximum adjustment limit Vmax | 0.25 mm | |
| ISO code indexable insert | SOGX 110509 | |
| Pack of insert screws | 239700 15IP (2.8 Nm) | |
| Indexable insert type for internal cutter | HB6810; HB6535; HB6640; HB630 | |
| Number of cutting edges Z | 1 | |
| Type of product | Indexable drill |
Identification numbers & Classifications
| Article number | 234010 34,5 | |
| EAN / GTIN | 4045197740670 | |
| Manufacturer number | 234010 34,5 |
Description
Uitvoering:
De gedraaide koelkanalen zorgen voor maximale stabiliteit aangezien de boorkern niet wordt verzwakt.
Boringtolerantie: −0,1 / +0,35 mm
Boringtolerantie: −0,1 / +0,35 mm
Omschrijving:
Voor zeer hoge prestaties en maatvastheid. Ook bij moeilijke boorsituaties tot 5×D.
T.b.v.:
Wisselplaten SOGX 110509.
Tip:
Verdere tussenmaten in 1/10-afmetingen op aanvraag leverbaar.