{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Indexable milling cutter 90° MEC17 25/2 mm
Article no.: 227500 25/2
Article code:
- Setting angle κ: 90
- Milling application: Circular milling; Ramping; End milling
- Through-coolant: yes
Product details
Technical Data
| Cutting edge ⌀ DC | 25 mm | |
| Number of cutting edges Z | 2 | |
| Shank type | Plain shank | |
| Setting angle κ | 90 degrees | |
| Milling application | Circular milling; Ramping; End milling | |
| Through-coolant | yes | |
| maximum cutting depth ap max | 15.7 mm | |
| Overhang L1 | 36 mm | |
| Overall length Ltot | 120 mm | |
| Shank ⌀ Ds h6 | 25 mm | |
| ⌀ D3 | 18 mm | |
| Circular interpolation milling ⌀ Dmin | 43 mm | |
| Circular interpolation milling ⌀ Dmax | 48 mm | |
| Ramping angle αmax | 0.86 degrees | |
| Ramping length L for αmax | 16.6 mm | |
| suitable indexable insert | BDMT 170408 | |
| Insert screw | 229709 (T15; 3.5 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 227500 25/2 | |
| EAN / GTIN | 4960664396177 | |
| Manufacturer number | THN03251 |
Description
Version:
Long cutting edges permit exceptionally large cutting depths.
Small number of cutting edges.
Small number of cutting edges.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Indexable milling cutter 90° MEC17 25/2 mm
on request
In stock
3 pieces in stock
199,27 £
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
15 pieces in stock
271,92 £
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
16 pieces in stock
223,93 £
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 2 | 2 | 2 |
| Overhang L1 | 36 mm | 60 mm | 32 mm |
| Milling application | Circular milling; Ramping; End milling | End milling; Circular milling; Ramping | Ramping; Circular milling; Plunging |
| Cutting edge ⌀ DC | 25 mm | 25 mm | 25 mm |
| Setting angle κ | 90 degrees | 90 degrees | 90 degrees |
| Shank ⌀ Ds h6 | 25 mm | 25 mm | 25 mm |
| Type of product | End / face mill | End / face mill | End / face mill |