{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 25 mm | |
Number of cutting edges Z | 3 | |
Shank type | Plain shank | |
Setting angle κ | 90 degrees | |
Milling application | Plunging; Ramping; End milling | |
Through-coolant | yes | |
maximum cutting depth ap max | 6 mm | |
Overhang L1 | 29 mm | |
Overall length Ltot | 120 mm | |
Shank ⌀ Ds h6 | 20 mm | |
⌀ D3 | 20 mm | |
Circular interpolation milling ⌀ Dmin | 45 mm | |
Circular interpolation milling ⌀ Dmax | 48 mm | |
Ramping angle αmax | 0.6 degrees | |
Ramping length L for αmax | 19.25 mm | |
suitable indexable insert | TOMT060508 | |
Insert screw | 229723 1 (10IP; 2.0 Nm) | |
Type of product | End / face mill |
Article number | 226400 25/3 | |
EAN / GTIN | 4960664914067 | |
Manufacturer number | THN08480 |
This article |
Recommendations |
|
---|---|---|
Indexable milling cutter 90° MEV, Plain shank, ⌀ D / number of teeth Z: 25/3mm
on request
In stock
3 pieces in stock
£204.35
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
14 pieces in stock
£274.45
plus VAT at the current rate
Prices plus delivery costs
|
|
Number of cutting edges Z | 3 | 3 |
Overhang L1 | 29 mm | 30 mm |
Cutting edge ⌀ DC | 25 mm | 25 mm |
⌀ D3 | 20 mm | 22 mm |
Circular interpolation milling ⌀ Dmin | 45 mm | 47 mm |
Ramping angle αmax | 0.6 degrees | 0.88 degrees |
Type of product | End / face mill | End / face mill |