{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Forwards countersinking mill 180° 25 mm
Article no.: 217160 25
Article code:
- Through-coolant: yes
- Tool exchange: PowerCard
- Countersink angle: 180
Product details
Technical Data
| Countersink ⌀ D | 25 mm | |
| Shank type | Weldon shank | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| Number of cutting edges Z | 2 | |
| Minimum ⌀ dmin | 8 mm | |
| Overhang L1 | 40 mm | |
| Overall length Ltot | 120 mm | |
| Shank ⌀ Ds h6 | 16 mm | |
| suitable indexable insert | 260150 | |
| Insert screw | 219844 (15IP; 3.0 Nm) | |
| Countersink angle | 180 degrees | |
| Type of product | Counterbores, countersinks |
Identification numbers & Classifications
| Article number | 217160 25 | |
| EAN / GTIN | 4045197552600 | |
| Manufacturer number | 217160 25 |
Description
Standard:
DIN 974-1 series 1 (for DIN cylinder-head bolts).
Note:
The recommended indexable inserts have a corner radius of 0.4 mm. If indexable inserts with a different larger corner radius are used, the dimension ⌀ dmin (see table) will not be achieved!
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Forwards countersinking mill 180° 25 mm
on request
In stock
4 pieces in stock
£228.43
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
29 pieces in stock
£272.80
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
27 pieces in stock
£173.50
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 2 | 1 | 1 |
| Overhang L1 | 40 | 30 | 49 |
| Overall length Ltot | 120 | 95 | 105 |
| suitable indexable insert | 260150 | TO.. 1604 | SP.T1204.. |
| Shank type | Weldon shank | Weldon shank | Weldon shank |
| Shank ⌀ Ds h6 | 16 | 25 | 25 |
| Type of product | Counterbores, countersinks | Counterbores, countersinks | Counterbores, countersinks |