{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Softcut® 90° shoulder mill MTC 32/3L mm
Article no.: 215565 32/3L
Article code:
- Setting angle κ: 90
- Milling application: End milling; Circular milling; Ramping
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Machining strategy: MTC
Product details
Technical Data
| Series | Softcut® | |
| Cutting edge ⌀ DC | 32 mm | |
| Number of cutting edges Z | 3 | |
| Shank type | Plain shank | |
| Setting angle κ | 90 degrees | |
| Milling application | End milling; Circular milling; Ramping | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Machining strategy | MTC | |
| Tool exchange | PowerCard | |
| Overhang L1 | 40 mm | |
| Overall length Ltot | 210 mm | |
| Shank ⌀ Ds h6 | 30 mm | |
| ⌀ D3 | 29 mm | |
| Circular interpolation milling ⌀ Dmin | 61 mm | |
| Circular interpolation milling ⌀ Dmax | 62 mm | |
| Circular interpolation milling ap | 1.9 mm | |
| Ramping angle αmax | 0.65 degrees | |
| Ramping length L for αmax | 26.5 mm | |
| suitable indexable insert | AP.. 1335.. | |
| Pack of insert screws | 219826 (8IP; 2.2 Nm) | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 215565 32/3L | |
| EAN / GTIN | 4045197409072 | |
| Manufacturer number | 215565 32/3L |
Description
Version:
High precision indexable shoulder mill with irregular pitch for very smooth cutting, very high precision, and very high metal removal rate. New generation of high performance indexable shoulder mills with special geometry for reduced cutting forces for MTC applications under unstable conditions or for spindles with low drive power.
Application:
For shoulder milling to large depths, also slotting. General use in all steels including stainless steels.
Spare part:
Pack of insert screws No. 219826 (8IP; 2.2 Nm).
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
GARANT Softcut® 90° shoulder mill MTC 32/3L mm
on request
In stock
12 pieces in stock
£308.96
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
33 pieces in stock
£312.25
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overhang L1 | 40 | 55 |
| Overall length Ltot | 210 | 195 |
| suitable indexable insert | AP.. 1335.. | AP.. 1003.. |
| Setting angle κ | 90 | 90 |
| ⌀ D3 | 29 | 29 |
| Circular interpolation milling ⌀ Dmax | 62 | 62 |
| Type of product | End / face mill | End / face mill |