{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Power Q high feed rate indexable milling cutter 16/2 mm
Article no.: 212802 16/2
Article code:
- Milling application: Circular milling; Ramping; Plunging
- Through-coolant: yes
- Machining strategy: HPC
- Tool exchange: PowerCard
Product details
Technical Data
| Series | Power Q | |
| Cutting edge ⌀ DC | 16 mm | |
| Number of cutting edges Z | 2 | |
| Shank type | Weldon shank | |
| Milling application | Circular milling; Ramping; Plunging | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Tool exchange | PowerCard | |
| ⌀ D3 | 8 mm | |
| Overhang L1 | 30 mm | |
| Overall length Ltot | 80 mm | |
| Shank ⌀ Ds h6 | 16 mm | |
| Circular interpolation milling ⌀ Dmin | 24 mm | |
| Circular interpolation milling ⌀ Dmax | 30 mm | |
| Circular interpolation milling ap | 0.3 mm | |
| Ramping angle αmax | 3.73 degrees | |
| Ramping length L for αmax | 6.13 mm | |
| suitable indexable insert | XOM.060310 | |
| Setting angle κ | 15 degrees | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 212802 16/2 | |
| EAN / GTIN | 4045197938909 | |
| Manufacturer number | 212802 16/2 |
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
GARANT Power Q high feed rate indexable milling cutter 16/2 mm |
||
| Overhang L1 | 30 | 30 |
| Setting angle κ | 15 | 20 |
| Milling application | Circular milling ;Ramping ;Plunging | Circular milling ;Circular milling ;Plunging |
| Overall length Ltot | 80 | 100 |
| Shank type | Weldon shank | Weldon shank |
| Shank ⌀ Ds h6 | 16 | 16 |
| Ramping length L for αmax | 6.13 | 8.4 |