{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Kopierfräser mit Bohrung, für Wendeschneidplatten RD.., ⌀ D / Anzahl Schneiden Z 100/9 mm
Article no.: 212145 100/9
Article code:
- Milling head suitable for insert shape: round
- Milling application: Circular milling; Ramping
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| Cutting edge ⌀ DC | 100 mm | |
| Number of cutting edges Z | 9 | |
| Shank type | with bore | |
| Milling head suitable for insert shape | round | |
| Milling application | Circular milling; Ramping | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| ⌀ D3 | 88 mm | |
| Overall length Ltot | 50 mm | |
| Mounting bore ⌀ | 32 mm | |
| Circular interpolation milling ⌀ Dmin | 188 mm | |
| Circular interpolation milling ⌀ Dmax | 198 mm | |
| Circular interpolation milling ap | 2.5 mm | |
| Ramping angle αmax | 0.57 degrees | |
| Ramping length L for αmax | 84.94 mm | |
| suitable indexable insert | RD..12T3 | |
| Pack of insert screws | 219805 (15IP; 3.8 Nm) | |
| Set of retaining screws | 219807 (15IP; 3.8 Nm) | |
| Setting angle κ | 15 – 27 degrees | |
| Fz Helix | 0.7 | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 212145 100/9 | |
| EAN / GTIN | 4045197192820 | |
| Manufacturer number | 212145 100/9 |
Description
Ausführung:
Fräskörper mit ungleicher Teilung für ruhigen Lauf.
- Hohe Plan- und Rundlaufgenauigkeit
- Stufenlose Neupositionierung bei Schneidkantenverschleiß.
Achtung:
Bei Einsatz der Wendeschneidplatten mit positiver Geometrie dürfen die Sicherungsschrauben und Sicherungsscheiben nicht verwendet werden.
Hinweis:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
GARANT Kopierfräser mit Bohrung, für Wendeschneidplatten RD.., ⌀ D / Anzahl Schneiden Z 100/9 mm
on request
In stock
2 pieces in stock
431,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
11 pieces in stock
601,00 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Einstellwinkel κ | 15 – 27 | 15 - 30 |
| Fräsverwendung | Circular milling ;Ramping | Zirkularfräsen ;Ramping |
| Innenkühlung | yes | ja |
| passende Wendeschneidplatte | RD..12T3 | RPK.1204M0T |
| ⌀ D3 | 88 | 88 |
| Rampinglänge L für αmax | 84.94 | 84,94 |
| Fz Helix | 0.7 | 0,7 |