{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide ball nose slot drill 1,5 mm
Article no.: 207125 1,5
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: h10
- No. of teeth Z: 2
Product details
Technical Data
| Cutting edge ⌀ DC | 1.5 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | h10 | |
| No. of teeth Z | 2 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.05×D for copy milling; 0.05×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 4 mm | |
| Radius R | 0.75 mm | |
| Overall length L | 50 mm | |
| Shank ⌀ Ds | 6 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.006 mm | |
| Feed fz for copy milling in steel < 900 N/mm2 | 0.006 mm | |
| Colour ring | without | |
| Type of product | Ball-nosed slot drill |
Identification numbers & Classifications
| Article number | 207125 1,5 | |
| EAN / GTIN | 4045197126306 | |
| Manufacturer number | 207125 1,5 |
Application Table
N
350
N
250
P
160
P
140
P
130
P
80
P
70
H
50
M
80
M
70
K
120
N
320
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Solid carbide ball nose slot drill 1,5 mm
on request
In stock
1,761 pieces in stock
£15.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
79 pieces in stock
£31.88
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
28 pieces in stock
£32.87
plus VAT at the current rate
Prices plus delivery costs
|
|
| Cutting width ae for milling operation | 0.05×D for copy milling ;0.05×D for side milling | 0.05×D for copy milling ;0.05×D for side milling | Full slot cutting depth 1×D ;0.03×D for copy milling |
| Through-coolant | no | no | no |
| Helix angle | 30 | 30 | 28 |
| Type | N | N | N |
| Feed fz for side milling in steel < 900 N/mm2 | 0.006 | 0.006 | 0.012 |
| No. of teeth Z | 2 | 2 | 2 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |