{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide roughing end mill HPC 16 mm
Article no.: 205270 16
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Milling profile: WR
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 16 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Milling profile | WR | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 48 mm | |
| Overhang length L1 incl. recess | 58 mm | |
| Recess ⌀ D1 | 15 mm | |
| Overall length L | 108 mm | |
| Shank ⌀ Ds | 16 mm | |
| Corner rounding rv | 0.32 mm | |
| Feed fz for slot milling in short-chipping aluminium | 0.2 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.22 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 205270 16 | |
| EAN / GTIN | 4062406122669 | |
| Manufacturer number | 205270 16 |
Application Table
N
300
N
280
N
200
N
120
N
100
N
80
N
100
Description
Version:
For roughing.
Special profile for machining non-ferrous metals.
Special profile for machining non-ferrous metals.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Solid carbide roughing end mill HPC 16 mm
on request
In stock
18 pieces in stock
£132.29
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
55 pieces in stock
£215.20
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
32 pieces in stock
£110.52
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overhang length L1 incl. recess | 58 | 44 | 42 |
| Overall length L | 108 | 92 | 92 |
| Through-coolant | no | no | no |
| Standard | Manufacturer’s standard | DIN 6527 | DIN 6527 |
| No. of teeth Z | 3 | 5 | 3 |
| Machining strategy | HPC | HPC ;TPC | HPC |
| Corner rounding rv | 0.32 | 0.3 | 0.32 |