{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Alternative article:
-
Article no.: 203093 8
Solid carbide milling cutter with chip separators TPC, TiAlN, ⌀ f8 DC: 8mm
Article no.: 203090 8
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: f8
- No. of teeth Z: 5
Product details
Technical Data
| Cutting edge ⌀ DC | 8 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 5 | |
| Helix angle | 40 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal and oblique | |
| Cutting width ae for milling operation | 0.05×D | |
| Balance quality with shank | G 2.5 with HB | |
| Through-coolant | no | |
| Machining strategy | TPC | |
| Flute length Lc | 32 mm | |
| Overall length L | 74 mm | |
| Shank ⌀ Ds | 8 mm | |
| Corner chamfer width at 45° | 0.16 mm | |
| Corner chamfer angle | 45 degrees | |
| Average chip thickness hmax for TPC milling in Toolox 44 HRC | 0.038 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203090 8 | |
| EAN / GTIN | 4045197814357 | |
| Manufacturer number | 203090 8 |
Application Table
P
380
P
340
P
300
P
230
P
150
H
60
H
40
H
25
M
220
M
150
Description
Version:
High-performance end mills for general-purpose machining, specially designed for TPC applications.
Strengthened core. Offset chip breaker. Optimised bending strength due to the use of ultra-fine grain substrates.
Strengthened core. Offset chip breaker. Optimised bending strength due to the use of ultra-fine grain substrates.
Note:
ae max = 0.05×D for TPC machining.
hmax: The values stated in the table are maximum values.
hmax: The values stated in the table are maximum values.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Solid carbide milling cutter with chip separators TPC, TiAlN, ⌀ f8 DC: 8mm
on request
In stock
202 pieces in stock
£92.60
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
32 pieces in stock
£108.18
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
79 pieces in stock
£90.93
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
20 pieces in stock
£110.71
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
313 pieces in stock
64.49 £
£40.92
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | TiAlN | TiAlN | TiAlN | TiAlN | TiSiN |
| Colour ring | green | blue | green | blue | green |
| Through-coolant | no | no | no | no | no |
| Standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard |
| Cutting edge ⌀ DC | 8 mm | 8 mm | 8 mm | 8 mm | 8 mm |
| No. of teeth Z | 5 | 7 | 5 | 7 | 4 |
| Machining strategy | TPC | TPC | TPC | TPC | TPC |