{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter TPC 4 mm
Article no.: 203088 4
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: f8
- No. of teeth Z: 5
Product details
Technical Data
| Cutting edge ⌀ DC | 4 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 5 | |
| Helix angle | 40 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal and oblique | |
| Cutting width ae for milling operation | 0.1×D | |
| Shank | DIN 6535 HB to h6 | |
| Balance quality with shank | G 2.5 with HB | |
| Through-coolant | no | |
| Machining strategy | TPC | |
| Flute length Lc | 11 mm | |
| Overall length L | 57 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer width at 45° | 0.08 mm | |
| Corner chamfer angle | 45 degrees | |
| Average chip thickness hmax for TPC milling in Toolox 44 HRC | 0.02 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203088 4 | |
| EAN / GTIN | 4045197814241 | |
| Manufacturer number | 203088 4 |
Application Table
P
380
P
340
P
300
P
230
P
150
H
60
H
40
H
25
M
220
M
150
Description
Version:
High-performance milling cutter specially designed for general-purpose TPC applications.
Strengthened core.
Optimised bending strength due to the use of ultra-fine grain substrates.
Strengthened core.
Optimised bending strength due to the use of ultra-fine grain substrates.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Solid carbide milling cutter TPC 4 mm
on request
In stock
77 pieces in stock
£52.36
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
86 pieces in stock
£39.40
plus VAT at the current rate
Prices plus delivery costs
|
|
| Standard | Manufacturer’s standard | Manufacturer’s standard |
| Shank | DIN 6535 HB to h6 | DIN 6535 HB to h6 |
| Flute length Lc | 11 | 16 |
| No. of teeth Z | 5 | 5 |
| Machining strategy | TPC | TPC |
| Direction of infeed | horizontal and oblique | horizontal and oblique |
| Average chip thickness hmax for TPC milling in Toolox 44 HRC | 0.02 | 0.018 |