{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide roughing end mill MTC, AlCrN, ⌀ e8 DC: 10mm
Article no.: 203071 10
Article code:
- Tool material: solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 10 mm | |
| Coating | AlCrN | |
| Tool material | solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 4 | |
| Helix angle | 45 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.1×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Balance quality with shank | G 2.5 with HB | |
| Through-coolant | no | |
| Machining strategy | MTC | |
| Flute length Lc | 22 mm | |
| Overhang length L1 incl. recess | 58 mm | |
| Recess ⌀ D1 | 9.7 mm | |
| Overall length L | 100 mm | |
| Shank ⌀ Ds | 10 mm | |
| Corner chamfer width at 45° | 0.2 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.04 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.05 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203071 10 | |
| EAN / GTIN | 4045197776068 | |
| Manufacturer number | 203071 10 |
Application Table
P
100
P
90
P
85
P
80
M
40
M
30
K
100
Description
Version:
For roughing and finishing up to 0.7×D into solid material at very high feed rates with smooth cutting action.
For cutting force reduction and better surface quality due to 45° helix.
Improved coating for a further reduction in cutting force combined with increased tool life.
For cutting force reduction and better surface quality due to 45° helix.
Improved coating for a further reduction in cutting force combined with increased tool life.
Application:
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||||||
|---|---|---|---|---|---|---|---|---|---|
Solid carbide roughing end mill MTC, AlCrN, ⌀ e8 DC: 10mm
on request
In stock
260 pieces in stock
£117.86
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1,282 pieces in stock
£48.50
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
82 pieces in stock
£74.25
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
225 pieces in stock
100.60 £
£64.87
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
252 pieces in stock
£77.79
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
53 pieces in stock
£94.27
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
273 pieces in stock
£57.59
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
188 pieces in stock
66.68 £
£42.52
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
251 pieces in stock
43.47 £
£28.49
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overhang length L1 incl. recess | 58 mm | 40 mm | 38 mm | 58 mm | 30 mm | 32 mm | 54 mm | 30 mm | 30 mm |
| Coating | AlCrN | TiAlN | TiAlN | TiAlN | AlCrN | TiAlN | TiAlN | TiSiN | TiSiN |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.1×D for side milling | Full slot cutting depth 1×D; 0.25×D for side milling | Full slot cutting depth 1×D; 0.25×D for side milling | Full slot cutting depth 1×D; 0.1×D for side milling | Full slot cutting depth 1×D; 0.3×D for side milling | Full slot cutting depth 1×D; 0.3×D for side milling | Full slot cutting depth 1×D; Full slot cutting depth 1×D | Full slot cutting depth 1×D; 0.3×D for side milling | Full slot cutting depth 1×D; 0.3×D for side milling |
| Recess ⌀ D1 | 9.7 mm | 9.5 mm | 9.7 mm | 9.7 mm | 9.7 mm | 9.7 mm | 9.5 mm | 9.7 mm | 9.7 mm |
| Through-coolant | no | no | no | no | no | no | no | no | no |
| Shank ⌀ Ds | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm |
| Spacing of the cutters | unequal spacing | unequal spacing | unequal spacing | unequal spacing | unequal spacing | unequal spacing | unequal spacing | unequal spacing | unequal spacing |