{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter, TiAlN, ⌀ DC: 10mm
Article no.: 202545 10
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: W
- Tolerance nominal ⌀: e8
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 10 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | W | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 4 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.25×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 25 mm | |
| Overall length L | 72 mm | |
| Shank ⌀ Ds | 10 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0.04 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.065 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202545 10 | |
| EAN / GTIN | 4045197117359 | |
| Manufacturer number | 202545 10 |
Application Table
N
300
N
280
N
200
N
180
N
130
N
150
N
130
N
110
N
180
N
120
N
150
Description
Version:
Extra sharp cutting edges.
Dimensions similar to DIN 6527.
Eccentric relief ground.
Dimensions similar to DIN 6527.
Eccentric relief ground.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||||
|---|---|---|---|---|---|---|---|---|
Solid carbide milling cutter, TiAlN, ⌀ DC: 10mm
on request
In stock
559 pieces in stock
£46.13
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
114 pieces in stock
£55.39
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
51 pieces in stock
£90.93
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
60 pieces in stock
£89.23
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
421 pieces in stock
£44.28
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
247 pieces in stock
£25.67
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
146 pieces in stock
87.56 £
£56.47
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
97 pieces in stock
£50.69
plus VAT at the current rate
Prices plus delivery costs
|
|
| Corner chamfer angle | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.25×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.25×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.25×D for side milling | Full slot cutting depth 1×D; Full slot cutting depth 1×D |
| Standard | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 | DIN 6527 |
| Flute length Lc | 25 mm | 25 mm | 25 mm | 25 mm | 22 mm | 22 mm | 25 mm | 25 mm |
| Helix angle | 45 degrees | 38 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 38 degrees | 38 degrees |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |