{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Alu solid carbide milling cutter HPC 3 mm
Article no.: 202470 3
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: W
- Tolerance nominal ⌀: h6
- No. of teeth Z: 4
Product details
Technical Data
| Series | Master Alu | |
| Cutting edge ⌀ DC | 3 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | W | |
| Tolerance nominal ⌀ | h6 | |
| No. of teeth Z | 4 | |
| Helix angle | 38 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; Full slot cutting depth 1×D | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 10 mm | |
| Overhang length L1 incl. recess | 15 mm | |
| Recess ⌀ D1 | 2.8 mm | |
| Overall length L | 57 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0.04 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.05 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202470 3 | |
| EAN / GTIN | 4062406245542 | |
| Manufacturer number | 202470 3 |
Application Table
N
250
N
200
N
180
N
180
N
130
N
150
N
130
N
110
N
180
N
120
N
150
Description
Version:
Extra sharp cutting edges.
Dimensions similar to DIN 6527.
Double relief ground side clearance angle.
For roughing and finishing. Up to 2×D into solid material at very high feed rates and smooth cutting action.
Dimensions similar to DIN 6527.
Double relief ground side clearance angle.
For roughing and finishing. Up to 2×D into solid material at very high feed rates and smooth cutting action.
Note:
Successor product to No. 202480.