{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Steel PickPocket solid carbide roughing end mill HPC 17,5 mm
Article no.: 202404 17,5
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: N
- Tolerance nominal ⌀: f8
- No. of teeth Z: 3
Product details
Technical Data
| Series | Master Steel | |
| Cutting edge ⌀ DC | 17.5 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | N | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 3 | |
| Helix angle | 38 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.4×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 31 mm | |
| Overhang length L1 incl. recess | 42 mm | |
| Recess ⌀ D1 | 17.3 mm | |
| Overall length L | 92 mm | |
| Shank ⌀ Ds | 18 mm | |
| Corner rounding rv | 0.88 mm | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.1 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.13 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202404 17,5 | |
| EAN / GTIN | 4045197781307 | |
| Manufacturer number | 202404 17,5 |
Application Table
P
260
P
240
P
190
P
180
P
150
M
80
M
70
K
250
Description
Version:
For roughing and finishing
With corner radii similar to torus cutters.
Up to 1×D into solid material at very high feed rates with smooth cutting action.
With corner radii similar to torus cutters.
Up to 1×D into solid material at very high feed rates with smooth cutting action.
Advantage:
Optimised flute form, eccentric relief ground, wide chip space.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
GARANT Master Steel PickPocket solid carbide roughing end mill HPC 17,5 mm
on request
In stock
8 pieces in stock
£207.07
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
95 pieces in stock
£134.76
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overhang length L1 incl. recess | 42 | 50 |
| Shank | DIN 6535 HB to h6 | DIN 6535 HB to h6 |
| Helix angle | 38 | 45 |
| Tolerance nominal ⌀ | f8 | 0 / -0.03 |
| Type | N | N |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.1 | 0.1 |
| Shank ⌀ Ds | 18 | 18 |