{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide mini milling cutter 0,5 mm
Article no.: 202264 0,5
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 0.5 mm | |
| Coating | AlCrN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; Full slot cutting depth 1×D | |
| Shank | Parallel shank to h6 | |
| Through-coolant | no | |
| Flute length Lc | 1.5 mm | |
| Overall length L | 38 mm | |
| Shank ⌀ Ds | 3 mm | |
| Shank form | HA | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.003 mm | |
| Feed fz for side milling in steel < 750 N/mm2 | 0.003 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202264 0,5 | |
| EAN / GTIN | 4045197861849 | |
| Manufacturer number | 202264 0,5 |
Application Table
N
280
N
200
P
120
P
110
P
100
P
70
P
60
M
70
M
50
K
90
Description
Version:
Shank similar to DIN 6535 HB.
Save on regrinding costs:
It is cheaper to use solid carbide mini milling cutters to the wear limit than to regrind them.
Improved coating for general-purpose applications in steel and cast iron.
Save on regrinding costs:
It is cheaper to use solid carbide mini milling cutters to the wear limit than to regrind them.
Improved coating for general-purpose applications in steel and cast iron.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Solid carbide mini milling cutter 0,5 mm
on request
In stock
150 pieces in stock
£14.67
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
259 pieces in stock
£11.42
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
418 pieces in stock
£14.67
plus VAT at the current rate
Prices plus delivery costs
|
|
| Corner chamfer angle | 45 | 45 | 45 |
| Overall length L | 38 | 38 | 38 |
| Shank form | HA | HA | HA |
| Cutting edge ⌀ DC | 0.5 | 0.5 | 0.5 |
| Flute length Lc | 1.5 | 1.5 | 1.5 |
| Tool material | Solid carbide | Solid carbide | Solid carbide |
| Type | N | N | N |