{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 16 mm | |
Coating | uncoated | |
Tool material | Solid carbide | |
Standard | Manufacturer’s standard | |
Type | W | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 3 | |
Helix angle | 45 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
Shank | DIN 6535 HA to h6 | |
Through-coolant | no | |
Flute length Lc | 48 mm | |
Overall length L | 110 mm | |
Shank ⌀ Ds | 16 mm | |
Corner chamfer angle | 90 degrees | |
Feed fz for slot milling in short-chipping aluminium | 0.065 mm | |
Feed fz for side milling in short-chipping aluminium | 0.09 mm | |
Colour ring | yellow | |
Type of product | End / face mill |
Article number | 202242 16 | |
EAN / GTIN | 4045197767165 | |
Manufacturer number | 202242 16 |
This article |
Recommendations |
|||||||
---|---|---|---|---|---|---|---|---|
Solid carbide slot drill, uncoated, ⌀ e8 DC: 16mm
on request
In stock
194 pieces in stock
£109.03
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
58 pieces in stock
£166.70
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
63 pieces in stock
£166.70
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
47 pieces in stock
£231.52
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
140 pieces in stock
£197.85
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
153 pieces in stock
£197.85
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
73 pieces in stock
222.26 £
£143.70
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
34 pieces in stock
£175.95
plus VAT at the current rate
Prices plus delivery costs
|
|
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.25×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.25×D for side milling | Full slot cutting depth 1×D; Full slot cutting depth 1×D |
Colour ring | yellow | yellow | yellow | yellow | yellow | yellow | yellow | yellow |
Shank | DIN 6535 HA to h6 | DIN 6535 HB to h6 | DIN 6535 HB to h6 | DIN 6535 HA to h6 | DIN 6535 HB to h6 | DIN 6535 HB to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
Cutting edge ⌀ DC | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm |
Feed fz for side milling in short-chipping aluminium | 0.09 mm | 0.09 mm | 0.09 mm | 0.12 mm | 0.09 mm | 0.09 mm | 0.18 mm | 0.14 mm |
Feed fz for slot milling in short-chipping aluminium | 0.065 mm | 0.065 mm | 0.065 mm | 0.065 mm | 0.065 mm | 0.065 mm | 0.14 mm | 0.12 mm |
No. of teeth Z | 3 | 3 | 3 | 4 | 3 | 3 | 4 | 3 |