{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 9 mm | |
Coating | TiAlN | |
Tool material | HSS Co 8 | |
Standard | DIN 844 | |
Milling profile | HR | |
Tolerance nominal ⌀ | ±0.12 | |
No. of teeth Z | 4 | |
Helix angle | 30 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Shank | DIN 1835 B to h6 | |
Through-coolant | no | |
Flute length Lc | 19 mm | |
Overall length L | 69 mm | |
Shank ⌀ Ds | 10 mm | |
Corner chamfer width at 45° | 0.3 mm | |
Corner chamfer angle | 45 degrees | |
Feed fz for slot milling in steel < 900 N/mm2 | 0.014 mm | |
Colour ring | green | |
Type of product | End / face mill |
Article number | 192840 9 | |
EAN / GTIN | 4045197108050 | |
Manufacturer number | 192840 9 |
This article |
Recommendations |
||||
---|---|---|---|---|---|
Roughing end mill 9 mm
on request
In stock
87 pieces in stock
£46.78
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
57 pieces in stock
£34.76
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
98 pieces in stock
£32.97
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
41 pieces in stock
£33.78
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
37 pieces in stock
£24.12
plus VAT at the current rate
Prices plus delivery costs
|
|
Corner chamfer angle | 45 | 45 | 45 | 45 | 45 |
Colour ring | green | without | without | without | without |
Milling profile | HR | NF | NR | NR | NR |
No. of teeth Z | 4 | 3 | 3 | 3 | 4 |
Corner chamfer width at 45° | 0.3 | 0.3 | 0.4 | 0.4 | 0.5 |
Shank ⌀ Ds | 10 | 10 | 10 | 10 | 10 |
Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |