{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 20 mm | |
Coating | TiAlN | |
Tool material | HSS Co 8 | |
Standard | DIN 844 B | |
Milling profile | NR | |
Tolerance nominal ⌀ | k12 | |
No. of teeth Z | 4 | |
Helix angle | 30 degrees | |
Spacing of the cutters | unequal spacing | |
Direction of infeed | horizontal, oblique and vertical | |
Shank | DIN 1835 B to h6 | |
Through-coolant | no | |
Flute length Lc | 38 mm | |
Overall length L | 104 mm | |
Shank ⌀ Ds | 20 mm | |
Corner chamfer width at 45° | 0.5 mm | |
Corner chamfer angle | 45 degrees | |
Feed fz for slot milling in steel < 750 N/mm2 | 0.031 mm | |
Colour ring | without | |
Type of product | End / face mill |
Article number | 192605 20 | |
EAN / GTIN | 4067263290957 | |
Manufacturer number | 192605 20 |
This article |
Recommendations |
|||||||
---|---|---|---|---|---|---|---|---|
Roughing end mill HSS-Co8, TiAlN, ⌀ k12 DC: 20mm
on request
In stock
960 pieces in stock
£62.38
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
13 pieces in stock
£72.62
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
22 pieces in stock
£64.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
55 pieces in stock
£89.34
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
96 pieces in stock
£71.68
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
49 pieces in stock
£43.05
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
156 pieces in stock
£71.80
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
106 pieces in stock
£45.41
plus VAT at the current rate
Prices plus delivery costs
|
|
Coating | TiAlN | uncoated | uncoated | TiAlN | TiAlN | uncoated | TiAlN | TiAlN |
Cutting edge ⌀ DC | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm |
Flute length Lc | 38 mm | 38 mm | 38 mm | 38 mm | 38 mm | 38 mm | 38 mm | 38 mm |
Feed fz for slot milling in steel < 750 N/mm2 | 0.031 mm | 0.07 mm | 0.05 mm | 0.05 mm | 0.05 mm | 0.031 mm | 0.07 mm | 0.031 mm |
No. of teeth Z | 4 | 3 | 3 | 3 | 3 | 4 | 4 | 4 |
Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
Shank ⌀ Ds | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm |