{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
End mill HSS-Co8 4 mm
Article no.: 191500 4
Article code:
- Tool material: HSS Co 8
- Norm: DIN 844 B
- Type: N
- Tolerance nominal ⌀: k10
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 4 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Norm | DIN 844 B | |
| Type | N | |
| Tolerance nominal ⌀ | k10 | |
| No. of teeth Z | 4 | |
| Helix angle | 30-40 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 11 mm | |
| Overall length L | 55 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.008 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 191500 4 | |
| EAN / GTIN | 4045197102799 | |
| Manufacturer number | 191500 4 |
Application Table
N
83
P
30
P
25
P
25
K
23
N
55
Description
Version:
Multi-flute end mill. Eccentric relief ground.
Centre cutting edge geometry for plunging.
Centre cutting edge geometry for plunging.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
End mill HSS-Co8 4 mm
on request
In stock
481 pieces in stock
£10.11
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
338 pieces in stock
£11.45
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
338 pieces in stock
£13.77
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
245 pieces in stock
£16.33
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
100 pieces in stock
£20.06
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
494 pieces in stock
£11.87
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | uncoated | uncoated | TiAlN | uncoated | uncoated | TiAlN |
| Corner chamfer angle | 90 | 90 | 90 | 90 | 90 | 90 |
| Colour ring | without | without | without | without | yellow | without |
| Cutting edge ⌀ DC | 4 | 4 | 4 | 4 | 4 | 4 |
| Flute length Lc | 11 | 11 | 11 | 19 | 11 | 11 |
| Tool material | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS Co 8 |
| Helix angle | 30-40 | 30 | 30 | 30 | 42 | 30-40 |