{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Slot drill 2 mm
Article no.: 191080 2
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844 B
- Type: N
- Tolerance nominal ⌀: e8
- Number of effective teeth Z (peripheral side): 2
Product details
Technical Data
| Cutting edge ⌀ DC | 2 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 B | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| Number of effective teeth Z (peripheral side) | 2 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 7 mm | |
| Overall length L | 54 mm | |
| Shank ⌀ Ds | 6 mm | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.006 mm | |
| Shank tolerance | h6 | |
| Corner chamfer angle | 90 degrees | |
| Colour ring | without | |
| Type of product | Milling cutter |
Identification numbers & Classifications
| Article number | 191080 2 | |
| EAN / GTIN | 4045197100009 | |
| Manufacturer number | 191080 2 |
Application Table
N
83
P
28
P
25
P
23
K
23
N
55
Description
Version:
Dimensions to DIN 844 long.
Cutting length to DIN 844 short.
Centre cutting edge geometry for plunging.
Cutting length to DIN 844 short.
Centre cutting edge geometry for plunging.
Application:
For milling keyways (slots) or pockets from the centre of the component.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Slot drill 2 mm
on request
In stock
231 pieces in stock
£15.31
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
899 pieces in stock
£9.88
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
297 pieces in stock
£12.91
plus VAT at the current rate
Prices plus delivery costs
|
|
| Colour ring | without | without | without |
| Helix angle | 30 | 30 | 30 |
| Type | N | N | N |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.006 | 0.006 | 0.006 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Shank ⌀ Ds | 6 | 6 | 6 |
| Type of product | Milling cutter | Milling cutter | Milling cutter |