{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Nominal ⌀ DC | 9 mm | |
Coating | uncoated | |
Tolerance | H7 | |
Tool material | HSS E | |
Standard | Manufacturer’s standard | |
Through-coolant | no | |
Shank | DIN 1835 A to h6 | |
Application for type of drilling | for through holes | |
Flute length Lc | 36 mm | |
Overhang L1 | 83 mm | |
Overall length L | 125 mm | |
Number of cutting edges Z | 6 | |
Shank ⌀ Ds | 10 mm | |
Feed f in steel < 750 N/mm2 | 0.25 mm/rev. | |
Reaming oversize in diameter | 0.1 mm - 0.2 mm | |
Shank tolerance | h6 | |
Colour ring | green | |
Type of product | Phillips bit |
Article number | 162900 9 | |
EAN / GTIN | 4045197090713 | |
Manufacturer number | 162900 9 |
This article |
Recommendations |
|||||
---|---|---|---|---|---|---|
NC reamer H7, uncoated, Nominal ⌀ DC mm or inch: 9
on request
In stock
215 pieces in stock
£23.14
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 2-3 weeks
0 pieces in stock
£53.93
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
52 pieces in stock
£46.14
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 6-8 weeks
0 pieces in stock
£72.13
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
15 pieces in stock
£47.47
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 2-3 weeks
0 pieces in stock
£74.69
plus VAT at the current rate
Prices plus delivery costs
|
|
Overhang L1 | 83 mm | 84 mm | 84 mm | 81 mm | 94 mm | 94 mm |
Overall length L | 125 mm | 125 mm | 125 mm | 125 mm | 162 mm | 162 mm |
Shank | DIN 1835 A to h6 | DIN 1835 A to h6 | Plain shank with h9 | Plain shank with h9 | Morse taper | Morse taper |
Tool material | HSS E | HSS E | HSS E | HSS E | HSS E | HSS E |
Application for type of drilling | for through holes | for through holes | for through holes | for through holes | for through hole | for through hole |
Feed f in steel < 750 N/mm2 | 0.25 mm/rev. | 0.25 mm/rev. | 0.25 mm/rev. | 0.2 mm/rev. | 0.13 mm/rev. | 0.13 mm/rev. |
Reaming oversize in diameter | 0.1 mm - 0.2 mm | 0.1 mm - 0.2 mm | 0.1 mm - 0.2 mm | 0.1 mm - 0.2 mm | 0.1 mm - 0.2 mm | 0.1 mm - 0.2 mm |