{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Hand reamer Configurable 1 mm
Article no.: 160200 1
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Even number of teeth with irregular spacing − teeth are exactly opposite each other; e. g. teeth 1 and 5.
- Tool material: HSS
- Standard: DIN 206 B
- Helix angle: 7-8
- Through-coolant: no
- Application for type of drilling: for through holes
Product details
Technical Data
| Nominal ⌀ DC | 1 mm | |
| Coating | uncoated | |
| Tool material | HSS | |
| Standard | DIN 206 B | |
| Helix angle | 7-8 degrees | |
| Through-coolant | no | |
| Application for type of drilling | for through holes | |
| ⌀ range | 0.950 mm - 1.180 mm | |
| Flute length Lc | 13 mm | |
| Overhang L1 | 19 mm | |
| Overall length L | 34 mm | |
| Number of cutting edges Z | 3 | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 160200 1 | |
| EAN / GTIN | 4045197926357 | |
| Manufacturer number | 160200 1 |
Application Table
N
P
P
P
Description
Version:
With left-hand helix 7 − 8° and long taper lead, more than 1/4 of the cutting length. An even number of teeth with irregular spacing for accurately round holes, free of chatter. The cylindrical ground chamfer on the plain cutting section smooths the hole and guides the reamer.
Hand reamers finish ground to match your specifications.
Hand reamers finish ground to match your specifications.
Application:
For through holes (not for blind holes). Also very suitable for interrupted holes.