{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
High-precision countersink 90° 25 mm
Article no.: 150396 25
Article code:
- Countersink tip angle: 90
- Tool material: HSS
- Number of cutting edges Z: 3
- Standard: DIN 335 D
- Shank: Morse taper
Product details
Technical Data
| External ⌀ | 25 mm | |
| Coating | TiN | |
| Countersink tip angle | 90 degrees | |
| Tool material | HSS | |
| Number of cutting edges Z | 3 | |
| Standard | DIN 335 D | |
| Shank | Morse taper | |
| Through-coolant | no | |
| smallest countersink ⌀ for holes from | 3.8 mm | |
| Overall length L | 106 mm | |
| Morse taper MT | 2 | |
| for countersunk screws DIN 7991 | M12 | |
| Feed f in steel < 500 N/mm2 | 0.2 mm/rev. | |
| Colour ring | without | |
| Pre-drill ⌀ | 3.8 mm | |
| Type of product | Stepped drill and countersink |
Identification numbers & Classifications
| Article number | 150396 25 | |
| EAN / GTIN | 4045197087010 | |
| Manufacturer number | 150396 25 |
Application Table
N
25
P
34
P
32
P
32
N
80
Description
Version:
Countersinks radially relief ground. Chip flutes are ground from solid up to size 31. Chip angle varies with the countersink ⌀ for optimum chip formation. Countersink point and circumference are relief ground and cut easily.
High-precision countersink for considerable performance improvement.
High-precision countersink for considerable performance improvement.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
High-precision countersink 90° 25 mm
on request
In stock
19 pieces in stock
£64.66
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
59 pieces in stock
£45.21
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
60 pieces in stock
£30.41
plus VAT at the current rate
Prices plus delivery costs
|
|
| Colour ring | without | without | without |
| for countersunk screws DIN 7991 | M12 | M12 | M12 |
| Overall length L | 106 | 106 | 106 |
| Through-coolant | no | no | no |
| Standard | DIN 335 D | DIN 335 D | DIN 335 D |
| Shank | Morse taper | Morse taper | Morse taper |
| Feed f in steel < 500 N/mm2 | 0.2 | 0.2 | 0.2 |