{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Countersink 90° 30 mm
Article no.: 150395 30
Article code:
- Countersink tip angle: 90
- Tool material: HSS
- Number of cutting edges Z: 3
- Norm: DIN 335 D
- Shank: Morse taper
Product details
Technical Data
| External ⌀ | 30 mm | |
| Coating | uncoated | |
| Countersink tip angle | 90 degrees | |
| Tool material | HSS | |
| Number of cutting edges Z | 3 | |
| Norm | DIN 335 D | |
| Shank | Morse taper | |
| Through-coolant | no | |
| smallest countersink ⌀ for holes from | 4.2 mm | |
| Overall length L | 112 mm | |
| Morse taper MT | 2 | |
| for countersunk screws ISO 2009, 2010, 7046, 7047 | M16 | |
| Feed f in steel < 500 N/mm2 | 0.2 mm/rev. | |
| Colour ring | without | |
| Pre-drill ⌀ | 4.2 mm | |
| Type of product | Stepped drill and countersink |
Identification numbers & Classifications
| Article number | 150395 30 | |
| EAN / GTIN | 4045197086921 | |
| Manufacturer number | 150395 30 |
Application Table
N
70
N
33
P
28
P
27
P
27
Description
Version:
Countersinks radially relief ground. Chip flutes are ground from solid up to size 31. Chip angle varies with the countersink ⌀ for optimum chip formation. Countersink point and circumference are relief ground and cut easily.
Economy countersink version.
Economy countersink version.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Countersink 90° 30 mm
on request
In stock
76 pieces in stock
£33.73
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
71 pieces in stock
£49.87
plus VAT at the current rate
Prices plus delivery costs
|
|
| Colour ring | without | without |
| for countersunk screws ISO 2009, 2010, 7046, 7047 | M16 | M16 |
| Overall length L | 112 | 112 |
| Countersink tip angle | 90 | 90 |
| Shank | Morse taper | Morse taper |
| smallest countersink ⌀ for holes from | 4.2 | 4.2 |
| Type of product | Stepped drill and countersink | Stepped drill and countersink |