{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Steel HT high-precision countersink with unequal spacing and 3 drive flats 90° 16,5 mm
Article no.: 150352 16,5
Article code:
- Countersink tip angle: 90
- Tool material: HSS E
- Spacing of the countersink cutting edges: unequal spacing
- Number of cutting edges Z: 3
- Standard: DIN 335 C
Offers
Set with price advantage
Product details
Technical Data
| External ⌀ | 16.5 mm | |
| Coating | TiAlN | |
| Countersink tip angle | 90 degrees | |
| Tool material | HSS E | |
| Spacing of the countersink cutting edges | unequal spacing | |
| Number of cutting edges Z | 3 | |
| Standard | DIN 335 C | |
| Shank | Shank with h9 and three drive flats | |
| Through-coolant | no | |
| smallest countersink ⌀ for holes from | 3.7 mm | |
| Overall length L | 60 mm | |
| Shank ⌀ Ds | 10 mm | |
| for countersunk screws DIN 7991 | M8 | |
| Feed f in steel < 1400 N/mm2 | 0.1 mm/rev. | |
| Colour ring | red | |
| Series | Master Steel | |
| Type of product | Stepped drill and countersink |
Identification numbers & Classifications
| Article number | 150352 16,5 | |
| EAN / GTIN | 4067263125501 | |
| Manufacturer number | 150352 16,5 |
Application Table
N
72
N
58
P
42
P
35
P
31
P
19
P
15
H
14
H
13
H
10
M
17
M
13
S
10
K
29
Description
Version:
Countersinks with 3 convex unequally spaced cutting edges for chatter-free countersinking and deburring. Robust design and special geometry with variable pitch of the spiral cutting edges for the highest demands – even in difficult-to-machine materials such as Toolox 44 and Hardox 500. Significantly reduced radial and axial forces. Manufactured with narrower production tolerances than specified by DIN335-C.
Advantage:
High self-guidance and stability due to the convex cutting edge geometry. Chatter-free running for excellent results with long tool life at the same time.
Application:
High-precision countersinks for production of exactly round 90° countersunk surfaces in steel, cast iron and materials that are challenging to machine. Exceptionally well suited for use on hand-held power drills and single-pillar drilling machines.