{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide jobber drill extra short 0,8 mm
Article no.: 122160 0,8
Article code:
- Tool material: Solid carbide
- Standard: DIN 6539
- Type: N
- Tolerance nominal ⌀: h7
- Number of cutting edges Z: 2
Product details
Technical Data
| Nominal ⌀ DC | 0.8 mm | |
| Coating | TiN | |
| Tool material | Solid carbide | |
| Standard | DIN 6539 | |
| Type | N | |
| Tolerance nominal ⌀ | h7 | |
| Number of cutting edges Z | 2 | |
| Point angle | 118 degrees | |
| recommended maximum drilling depth L2 | 3.8 mm | |
| Helix angle | 30 degrees | |
| Shank | Parallel shank to h7 | |
| Through-coolant | no | |
| Flute length Lc | 5 mm | |
| Overall length L | 24 mm | |
| Shank ⌀ Ds | 0.8 mm | |
| Shank tolerance | h7 | |
| Feed f in steel < 1100 N/mm2 | 0.01 mm/rev. | |
| Colour ring | without | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 122160 0,8 | |
| EAN / GTIN | 4045197040114 | |
| Manufacturer number | 122160 0,8 |
Application Table
N
230
N
160
N
160
P
80
P
80
P
70
P
50
P
30
M
30
M
25
S
20
K
85
N
160
Description
Version:
Similar to DIN 6539 (extra short).
Nominal ⌀ and shank ⌀ equal.
TiN coating.
Nominal ⌀ and shank ⌀ equal.
TiN coating.
Note:
Flute length LC = L2 + 1.5 × DC.
Non slip clamping in drill chuck No. 341050 with diamond coated jaws.
Non slip clamping in drill chuck No. 341050 with diamond coated jaws.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Solid carbide jobber drill extra short 0,8 mm
on request
In stock
72 pieces in stock
£5.72
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
375 pieces in stock
£4.84
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
190 pieces in stock
£7.59
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 2 | 2 | 2 |
| Coating | TiN | uncoated | TiAlN |
| Colour ring | without | without | without |
| Standard | DIN 6539 | DIN 6539 | DIN 6539 |
| Helix angle | 30 | 30 | 30 |
| Point angle | 118 | 118 | 118 |
| Shank ⌀ Ds | 0.8 | 0.8 | 0.8 |