{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide jobber drill extra short 11,5 mm
Article no.: 122100 11,5
Article code:
- Tool material: Solid carbide
- Standard: DIN 6539
- Type: N
- Tolerance nominal ⌀: h7
- Number of cutting edges Z: 2
Product details
Technical Data
| Nominal ⌀ DC | 11.5 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | DIN 6539 | |
| Type | N | |
| Tolerance nominal ⌀ | h7 | |
| Number of cutting edges Z | 2 | |
| Point angle | 118 degrees | |
| recommended maximum drilling depth L2 | 29.8 mm | |
| Helix angle | 30 degrees | |
| Shank | Parallel shank to h7 | |
| Through-coolant | no | |
| Flute length Lc | 47 mm | |
| Overall length L | 95 mm | |
| Shank ⌀ Ds | 11.5 mm | |
| Shank tolerance | h7 | |
| Feed f in steel < 1100 N/mm2 | 0.14 mm/rev. | |
| Colour ring | without | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 122100 11,5 | |
| EAN / GTIN | 4045197040053 | |
| Manufacturer number | 122100 11,5 |
Application Table
N
200
N
140
N
140
P
70
P
70
P
60
P
40
P
25
M
20
M
20
S
15
N
140
Description
Version:
Similar to DIN 6539 (extra short).
Nominal ⌀ and shank ⌀ equal.
Nominal ⌀ and shank ⌀ equal.
Note:
Flute length LC = L2 + 1.5 × DC.
Non slip clamping in drill chuck No. 341050 with diamond coated jaws.
Non slip clamping in drill chuck No. 341050 with diamond coated jaws.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Solid carbide jobber drill extra short 11,5 mm
on request
In stock
20 pieces in stock
£63.80
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
27 pieces in stock
£72.90
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
48 pieces in stock
£108.38
plus VAT at the current rate
Prices plus delivery costs
|
|
| Nominal ⌀ DC | 11.5 | 11.5 | 11.5 |
| Point angle | 118 | 118 | 118 |
| Type | N | N | N |
| Flute length Lc | 47 | 47 | 94 |
| Shank ⌀ Ds | 11.5 | 11.5 | 11.5 |
| Feed f in steel < 1100 N/mm2 | 0.14 | 0.14 | 0.14 |
| recommended maximum drilling depth L2 | 29.8 | 29.8 | 76.8 |