{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide special drill DIN 6535 HA 1 mm
Article no.: 121201 1
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Version: 5×D
- Tolerance nominal ⌀: ±0.003
- Number of cutting edges Z: 1
Product details
Technical Data
| Nominal ⌀ DC | 1 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Version | 5×D | |
| Tolerance nominal ⌀ | ±0.003 | |
| Number of cutting edges Z | 1 | |
| Point angle | 120 degrees | |
| recommended maximum drilling depth L2 | 5.5 mm | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Semi-Standard | yes | |
| Flute length Lc | 7 mm | |
| Overall length L | 45 mm | |
| Shank ⌀ Ds | 3 mm | |
| Shank tolerance | h6 | |
| Feed f in PEEK | 0.1 mm/rev. | |
| Colour ring | without | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 121201 1 | |
| EAN / GTIN | 4045197715418 | |
| Manufacturer number | 121201 1 |
Application Table
N
30
N
50
N
50
N
50
N
50
N
60
N
60
N
60
N
50
N
40
N
40
Description
Version:
Spiral flute precision drill for plastics. Self-centring with 1-cutter geometry, achieves very high alignment accuracy. Polished helical flutes for optimum chip evacuation.
Maintains the tolerance band IT7 from entry ⌀ through to exit ⌀, due to special point geometry.
Maintains the tolerance band IT7 from entry ⌀ through to exit ⌀, due to special point geometry.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Solid carbide special drill DIN 6535 HA 1 mm
on request
In stock
27 pieces in stock
£26.87
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
58 pieces in stock
£35.47
plus VAT at the current rate
Prices plus delivery costs
|
|
| Semi-Standard | yes | yes |
| Number of cutting edges Z | 1 | 2 |
| Coating | uncoated | TiN |
| Nominal ⌀ DC | 1 | 1 |
| Tool material | Solid carbide | Solid carbide |
| Shank ⌀ Ds | 3 | 4 |
| recommended maximum drilling depth L2 | 5.5 | 5.5 |