{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HSS jobber drill N 1,65
Article no.: 114150 1,65
Article code:
- Tool material: HSS
- Standard: DIN 338
- Type: N
- Tolerance nominal ⌀: h8
- Point angle: 118
Product details
Technical Data
| Nominal ⌀ DC | 1.65 mm | |
| Coating | uncoated | |
| Tool material | HSS | |
| Standard | DIN 338 | |
| Type | N | |
| Tolerance nominal ⌀ | h8 | |
| Point angle | 118 degrees | |
| Shank | Plain shank | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| recommended maximum drilling depth L2 | 17.5 mm | |
| Flute length Lc | 20 mm | |
| Overall length L | 43 mm | |
| Shank ⌀ Ds | 1.65 mm | |
| Feed f in steel < 750 N/mm2 | 0.03 mm/rev. | |
| Colour ring | without | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 114150 1,65 | |
| EAN / GTIN | 4045197012555 | |
| Manufacturer number | 114150 1,65 |
Application Table
N
80
N
45
N
50
P
40
P
30
P
25
P
10
P
8
K
25
N
80
Description
Exécution:
Rectifiés: Forets hélicoïdaux avec grande précision de concentricité et de pas ainsi qu’un affûtage au sommet précis.
À partir de 2,4 mm, vaporisés.
Avec amincissement type C à partir de 4 mm.
À partir de 2,4 mm, vaporisés.
Avec amincissement type C à partir de 4 mm.
Recommandation(s):
Profondeur de perçage maximale:
L2 = LC - 1,5 × DC.
L2 = LC - 1,5 × DC.
Remarque(s):
Réf. 16 − 20: forets avec queue ⌀ 16 mm.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Foret hélicoïdal HSS N 1,65
on request
Delivery in 3 - 4 working days
7 pieces in stock
from
1
Pieces
CHF 3.40
plus VAT at the current rate
Prices plus delivery costs
from
5
Pieces
CHF 2.85
plus VAT at the current rate
Prices plus delivery costs
|
on request
Delivery in 3 - 4 working days
194 pieces in stock
from
1
Pieces
CHF 1.95
plus VAT at the current rate
Prices plus delivery costs
from
5
Pieces
CHF 1.65
plus VAT at the current rate
Prices plus delivery costs
|
|
| Revêtement | uncoated | non revêtu |
| Bague de couleur | without | Sans |
| Longueur totale L | 43 | 43 |
| Arrosage interne | no | non |
| ⌀ nom. DC | 1.65 | 1,65 |
| Norme | DIN 338 | DIN 338 |
| Profondeur de perçage maximale recommandée L2 | 17.5 | 17,5 |