{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
NC spotting drill HSS-E 90° N 10 mm
Article no.: 112020 10
Article code:
- Tool material: HSS E
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: h6
- Point angle: 90
Product details
Technical Data
| Shank tolerance | h6 | |
| Nominal ⌀ DC | 10 mm | |
| Coating | TiAlN | |
| Tool material | HSS E | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | h6 | |
| Point angle | 90 degrees | |
| Shank | DIN 1835 B to h6 | |
| Number of cutting edges Z | 2 | |
| Through-coolant | no | |
| Flute length Lc | 25 mm | |
| Overall length L | 89 mm | |
| Shank ⌀ Ds | 10 mm | |
| Feed f in steel < 900 N/mm2 | 0.06 mm/rev. | |
| Colour ring | without | |
| Type of product | Spotting drill |
Identification numbers & Classifications
| Article number | 112020 10 | |
| EAN / GTIN | 4045197001160 | |
| Manufacturer number | 112020 10 |
Application Table
N
87
N
56
N
50
P
50
P
37
P
31
P
12
P
10
M
15
M
10
S
6
K
31
N
100
Description
Version:
≥ ⌀ 6 mm with drive flat to DIN 1835-B.
Precision centred ground point with thin chisel edge - gives easy spot drilling and high accuracy of the centre hole form. Very sturdy due to short flutes.
Precision centred ground point with thin chisel edge - gives easy spot drilling and high accuracy of the centre hole form. Very sturdy due to short flutes.
Note:
Use speed for the actual hole ⌀
(not necessarily the speed for the drill outer ⌀).
(not necessarily the speed for the drill outer ⌀).