{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 3 mm | |
Coating | DLC | |
Tool material | Solid carbide | |
Standard | Manufacturer’s standard | |
Type | W | |
Tolerance nominal ⌀ | -0.007 / 0.002 | |
No. of teeth Z | 2 | |
Helix angle | 45 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | 0.03×D for copy milling | |
Shank | DIN 6535 HA to h6 | |
Balance quality with shank | G 2.5 with HA | |
Through-coolant | no | |
Flute length Lc | 6 mm | |
Radius R | 1.5 mm | |
Overhang length L1 incl. recess | 16 mm | |
Recess ⌀ D1 | 2.7 mm | |
Overall length L | 50 mm | |
Shank ⌀ Ds | 3 mm | |
Feed fz for copy milling in short-chipping aluminium | 0.03 mm | |
Colour ring | yellow | |
Type of product | Ball-nosed slot drill |
Article number | 207097 3 | |
EAN / GTIN | 4045197854766 | |
Manufacturer number | 207097 3 |
This article |
Recommendations |
||||||
---|---|---|---|---|---|---|---|
Solid carbide high precision ball nose slot drill, DLC, ⌀ DC: 3mm
on request
In stock
66 pieces in stock
£47.65
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
183 pieces in stock
£28.12
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
79 pieces in stock
£33.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
3,107 pieces in stock
£15.40
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
107 pieces in stock
116.60 £
£70.25
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
102 pieces in stock
£100.18
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
72 pieces in stock
116.60 £
£74.03
plus VAT at the current rate
Prices plus delivery costs
|
|
Cutting width ae for milling operation | 0.03×D for copy milling | 0.05×D for copy milling; 0.05×D for side milling | 0.05×D for copy milling; 0.05×D for side milling | 0.05×D for copy milling; 0.05×D for side milling | 0.03×D for copy milling | 0.05×D for copy milling | 0.03×D for copy milling |
Through-coolant | no | no | no | no | no | no | no |
Radius R | 1.5 mm | 1.5 mm | 1.5 mm | 1.5 mm | 1.5 mm | 1.5 mm | 1.5 mm |
Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h5 | DIN 6535 HA to h6 | DIN 6535 HA to h5 |
Helix angle | 45 degrees | 30 degrees | 30 degrees | 30 degrees | 30 degrees | 30 degrees | 30 degrees |
Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
Shank ⌀ Ds | 3 mm | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm |