{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
Uniwersalny pilnik płaski z uchwytem i nacięciem specjalnym 300 mm
Réf.: 515000 300
Référence:
Détails du produit
Caractéristiques techniques
| Section | 30×6,5 mm | |
| Longueur sans queue | 300 mm | |
| Type de produit | Limes universelles |
Numéros d’identification et classifications
| Référence article | 515000 300 | |
| EAN / GTIN | 4009215074697 | |
| Réf. fabricant | 30053000 |
Tableau d’application
Description
Version:
The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
Hand files with corner radius profile teeth and wide chip breakers for easy, low force filing and very high metal removal rates no clogging of the teeth good filings clearance.
Flat faces with special cut, one side with filings breaker groove for highest removal rate. File with square end. Rear face with continuous cut for particularly fine finishing. File with plain end.
Hand files with corner radius profile teeth and wide chip breakers for easy, low force filing and very high metal removal rates no clogging of the teeth good filings clearance.
Flat faces with special cut, one side with filings breaker groove for highest removal rate. File with square end. Rear face with continuous cut for particularly fine finishing. File with plain end.
Plastic handle with hanging hole.
Application:
The quality file for workshop use with long tool life and high removal rate.