{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
- Norme pour les tirettes: ISO 7388
Détails du produit
Caractéristiques techniques
| Pour cône | 40 | |
| Propriété de l'alésage | avec alésage | |
| Norme pour les tirettes | ISO 7388 | |
| ⌀ moyeu D | 22,5 mm | |
| ⌀ tête D1 | 18,95 mm | |
| Longueur totale L | 44,5 mm | |
| L1 | 16,25 mm | |
| Filetage M | M16 | |
| Couple de serrage maximal | 50 Nm | |
| Pour cône SA avec code couleur | SA 40 | |
| Type de produit | Tirettes |
Numéros d’identification et classifications
| Référence article | 308640 40 | |
| EAN / GTIN | 4045197150967 | |
| Réf. fabricant | 308640 40 |
Description
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
- For tools with taper shanks see also DIN 69871 and JIS B 6339 (MAS-BT).
- In machining centres (machines with automatic tool changers).
- In NC machines (machines without automatic tool changers).
Note:
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.
When installing the pull stud, cheque the correct tightening torque.
Téléchargements et documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
| Pull stud standard | ISO 7388 | ISO 7388 |
| Thread M | M16 | M16 |
| Head ⌀ D1 | 18,95 | 18.95 |
| L1 | 16,25 | 16.25 |
| maximum tightening torque | 50 | 50 |
| suitable for taper arbors with colour code | SA 40 | SK 40 |
| Hole characteristics | avec alésage | with bore |