{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
Grooving toolholder 25/4 mm
Réf.: 273761 25/4
Référence:
Détails du produit
Caractéristiques techniques
| Largeur de gorge w | 4 mm | |
| Type d'utilisation | Gauche | |
| Arrosage interne | non | |
| ⌀ maximal | 65 mm | |
| Profondeur de coupe tmax | 32,5 mm | |
| Largeur fonctionnelle L4 | 26,5 mm | |
| Longueur de tête L1 | 51 mm | |
| Largeur queue b | 25 mm | |
| Longueur totale L | 150 mm | |
| Vis | 279815 6 (TX25; 6 Nm) | |
| Rainurage axial possible | oui | |
| Type de produit | Porte-outils à vis |
Numéros d’identification et classifications
| Référence article | 273761 25/4 | |
| EAN / GTIN | 4045197719959 | |
| Réf. fabricant | 273761 25/4 |
Description
Version:
Made of high-tensile tool steel (> 1300 N/mm2). In conjunction with the convex insert clamping, the system achieves very high resistance to axial and radial cutting forces and thereby significantly increases the surface quality and productivity.
8×w
Note:
Maximum ⌀ = limited workpiece ⌀ due to the tool type.
From 19.5 mm groove depth (up to groove width 3 mm) and from 24.5 mm groove depth (from groove width 4 mm) the second cutter comes into contact with the workpiece. This can lead to scoring.
If necessary, use single-ended grooving inserts No. 273656 – 273670.
From 19.5 mm groove depth (up to groove width 3 mm) and from 24.5 mm groove depth (from groove width 4 mm) the second cutter comes into contact with the workpiece. This can lead to scoring.
If necessary, use single-ended grooving inserts No. 273656 – 273670.