{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
Fraise à bout hémisphérique carbure monobloc GARANT Diabolo HPC 6 mm
Réf.: 207472 6
Référence:
- Tool material: Carbure monobloc
- Norme: Norme usine
- Type: H
- Tolérance ⌀ nominal: f8
- No. of teeth Z: 4
Détails du produit
Caractéristiques techniques
| Series | Diabolo | |
| Cutting edge ⌀ DC | 6 mm | |
| Coating | TiAlN | |
| Tool material | Carbure monobloc | |
| Norme | Norme usine | |
| Type | H | |
| Tolérance ⌀ nominal | f8 | |
| No. of teeth Z | 4 | |
| Helix angle | 30 degrees | |
| Direction of infeed | Horizontal, oblique et vertical | |
| Cutting width ae for milling operation | 0,2×D pour le dressage; 0,05×D pour le copiage | |
| Queue | DIN 6535 HA avec h6 | |
| Arrosage interne | non | |
| Machining strategy | HPC | |
| Flute length Lc | 10 mm | |
| Radius R | 3 mm | |
| Overall length L | 54 mm | |
| Shank ⌀ Ds | 6 mm | |
| Feed fz for side milling in steel < 65 HRC | 0.048 mm | |
| Feed fz for copy milling in steel < 65 HRC | 0.048 mm | |
| Colour ring | Rouge | |
| Type of product | Fraises à bout hémisphérique et à bout sphérique |
Numéros d’identification et classifications
| Référence article | 207472 6 | |
| EAN / GTIN | 4045197600585 | |
| Réf. fabricant | 207472 6 |
Tableau d’application
P
200
H
190
H
170
H
150
H
110
Description
Version:
GARANT Diabolo:
Special geometry, newly developed coating and carbide for hard machining. 4 centre cutting edges to the centre. Therefore can be used as a true 4-edge drill at all depths of cut.
Tolerance: Radius contour = ±0.005 mm.
Special geometry, newly developed coating and carbide for hard machining. 4 centre cutting edges to the centre. Therefore can be used as a true 4-edge drill at all depths of cut.
Tolerance: Radius contour = ±0.005 mm.