{{ name }}
Tuote nro. {{ combinedCodeWithHighlight }}
Tuotekoodi:
EAN / GTIN:
Valmistajan numero:
Jobber drill with stepped tip HSS-E Stainless steel 5,2 mm
Tuote nro.: 114008 5,2
Tuotekoodi:
- Lastuava aine: HSS E
- Standard: DIN 338
- tyyppi: INOX
- Tolerance nominal ⌀: h8
- Point angle: 118
Tuotetiedot
Tekniset tiedot
| Nominal ⌀ DC | 5.2 mm | |
| Pinnoitus | pinnoittamaton | |
| Lastuava aine | HSS E | |
| Standard | DIN 338 | |
| tyyppi | INOX | |
| Tolerance nominal ⌀ | h8 | |
| Point angle | 118 degrees | |
| Shank | Three drive flats shank | |
| Number of cutting edges Z | 2 | |
| Sisäjäähdytys | ei | |
| recommended maximum drilling depth L2 | 44.2 mm | |
| Flute length Lc | 52 mm | |
| Overall length L | 86 mm | |
| Shank ⌀ Ds | 5.2 mm | |
| Feed f in steel < 750 N/mm2 | 0.1 mm/rev. | |
| Värirengas | sininen | |
| Tuotetyyppi | Kierukkapora |
Tunnistenumerot ja Luokitukset
| Tuotekoodi | 114008 5,2 | |
| EAN / GTIN | 4062406877088 | |
| Valmistajan numero | 114008 5,2 |
Käyttötaulukko
N
70
N
70
N
50
P
35
P
32
P
25
P
15
M
14
M
12
K
30
N
50
Kuvaus
Version:
Chamfers are nitrided. Particularly sturdy and robust due to the strengthened core diameter. Ground flutes, with high concentricity. Precision ground point. Three drive flats on the shank for use in a 3-jaw chuck.
With special cutter geometry also for use in stainless steels.
- Ideal for producing precise holes in sheet metal, pipes, and profiles.
- Reliable spot drilling without centring or centre punching – even on curved surfaces – thanks to innovative ground point.
- Oblique drilling possible without any problems after the first level of the drill tip has penetrated the material.
- Drilling with significantly less force required than with conventional DIN338 HSS drills – up to a diameter of 13 mm directly in the cordless drill/driver.
- Stable and secure form fit in the 3-jaw chuck.
- General use across a wide spectrum of materials including plastic, wood and acrylic without tearing or splintering.
- The drill does not rattle or dig in – even in the case of thin-walled materials.
- Burr-free drill exit.
- Ideal for drilling out bolts and rivets.
With special cutter geometry also for use in stainless steels.
Recommendation:
Maximum drilling depth:
L2 = LC - 1.5 × DC.
L2 = LC - 1.5 × DC.