Version:
Manual height adjustment as a plug-in module in the feet of the workbench including wheels with ⌀ 125 mm. Fibre shields prevent the castors jamming. Optimally smooth running due to high-quality ball bearings, with treadless polyurethane tyres, minimal rolling resistance and low noise emitted in motion. The wheel set has a maximum load capacity of 100 kg and must not be fitted to support legs with a height of 900 mm. Not possible in conjunction with Ready-to-go workbenches. Height adjustment at 25 mm intervals.
Supplied with:
Set consisting of 2 plug-in modules, suitable for 1 support leg or 2 feet.
Set consisting of 2 plug-in modules with castors with brakes, including fastenings.
Colour:
Height adjustment RAL 7035 light grey, powder-coated. Wheels galvanised, not configurable.
Note:
The fitting of wheels increases the working height of the workbench by 150 mm. You will need 2 sets for one workbench with 2 support legs.
When calculating the load capacity of the workbench, only 3 wheels may be taken into account. The maximum load capacity of a workbench is 150 kg.